Step-by-step tutorial for upgrading RAM for laptops

Study time: 5 Minutes

If your desktop or laptop computer has recently slowed down and lagged, you may be running low on RAM. Most computer problems, such as long delays in running programs, lag, freezing with switching, and fixing storage devices such as SSDs and HDDs are often fixed. Today we will teach you how to upgrade your laptop RAM, so stay tuned with Lyon Tech.

Learning to upgrade or replace laptop RAM

It is interesting to know that sometimes by installing an SSD memory, you can restore even the oldest systems, the high speed of data transfer in this type of memory will improve the overall efficiency of the system. But the main priority of the system depends on the rams. If your laptop has RAM upgradeability, it is better to do this, because it does not require much time and money.

Laptop RAM modules today cost between $ 25 and $ 55, which is cheaper than other hardware components. One of the most important issues here is to see if your laptop motherboard supports up to a few gigabytes of RAM and how many more gigabytes you can add to the current capacity.

Note that it is better to install the RAM modules as Dual Channel with the same models, otherwise you will face problems such as incompatibility of the RAMs with each other or a sharp drop in speed. But how to access and replace RAMs is something that we will explain in today’s article.

The first step is to check the current amount of RAM

Lack of RAM is usually associated with a bottleneck problem, and the computer slows down to perform simple processes. If you experience difficulty and slowness in running simple and multitasking programs, you must check the status of the RAMs and upgrade them if necessary. In the Windows operating system, by referring to the Task Manager section and clicking on the More Details option and then the Performance option, you can monitor the complete status of your hardware. In this window, if you click on the Memory option, it will show you the actual capacity of the RAM and how much it is currently occupied.

Check that your system has RAM upgradeability

Unfortunately, most laptops today have a sealed body and access to their internal components is very difficult. In some other laptops, RAM chips and modules are installed on board. By visiting the official specifications page of your laptop in the manufacturer, you can see the number of channels embedded for RAM and see that this motherboard has a few gigabytes of space to upgrade RAM.

As mentioned, RAM modules will be much more efficient if installed dual channel. RAM frequency is also another important issue that you should pay attention to when buying. For example, my computer does not support a higher frequency of 3600 MHz for RAM, and if you install such RAM, its maximum frequency will be reduced to the number that the motherboard supports.

In some laptops, it can be seen that the RAM capacity is 12 GB or 36 GB, in these types of systems, usually the number of individual modules is used, which causes a decrease in the speed and energy of the laptops. So try to buy modules that are the same and install them all as Dual Channel.

You need to follow these steps to access laptop RAMs

Before opening the laptop case and having access to its internal parts, try to have a ground connection cable with you to avoid possible dangers such as electric shock. Using a ground cable, the capacitance of all system capacitors and other components that contain electricity is discharged.

You may need to discard the current modules

Sometimes all the RAM ports on your laptop are occupied and you can no longer install more modules on it, this problem occurs when the manufacturer has installed them as Dual Channel, regardless of the capacity of the RAM. In this case, it is better to discard the current modules and use completely new RAMs. Be careful not to touch the gold pins when removing the RAMs, and release the retaining clip on the motherboard as you remove them. To place new rams, just place them in the right direction on the door and press a little.

Be sure to unplug your laptop and turn it off completely before removing or installing the RAM. It is better to disconnect the battery as well. Finally, you can turn on the system after replacing the RAMs and go to the same section in the Task Manager to check if the RAMs are installed correctly with the capacity written on them.