IPhone 14 Pro Max was displayed in schematic designs

A few more months until the introduction of the new generation Apple iPhone Remains, but information leaked and schematic images shared from IPhone 14 Pro Max Show the latest possible design changes.

Schematic drawings Details of Apple’s iPhone 14 Pro Max have been shared online, indicating that the top cut of the device’s screen will be 7.15 mm and the side aperture will probably be 5.59 mm.

The leaked images also show that between the oval notch and the aperture above the display where the sensors are located Face ID And they are selfie cameras, there will be a distance.

Possible specifications of iPhone 14 Pro Max

According to the leaked information, the iPhone 14 Pro Max seems to have narrow margins. 1.95 mm The gain will be significantly thinner than the 2.42mm margin of the iPhone 13 Pro Max. This change will increase the screen-to-body ratio of the new iPhone.

The iPhone 14 Pro Max will probably be 160.7 mm high, and the width of the device with its side buttons will apparently be 78.53 mm. The thickness of the new mobile phone will be 12.16 mm with the protrusion of the main camera.

A previous report on the smartphone said that the camera protrusion in future models of the iPhone 14 series will be slightly higher, which is due to the fact that Apple intends to use the sensor. 48 megapixel main camera Use a 12-megapixel sensor instead.

The next-generation iPhone Pro Max is expected to feature a 6.7-inch display, and the Pro model is expected to feature a 6.1-inch display. Finally, the Pro models are expected to be equipped with the A16 Pro chip, and the standard and Max versions will be equipped with the A16 chip, which will be the same A15 with minor improvements.