The Galaxy S22 Plus received an acceptable repair rate [تماشا کنید]

PBKreviews YouTube channel after reviewing the standard version of Samsung’s new flagships, this time Galaxy S22 Plus Gone and how deassembleing It is shown in a video.

Video by detachment Back panel The machine starts from the glue Camera module And Lenses Also come out with it as a single set. However, if you plan to have the module and the cameras separately, you will need to reheat them to loosen the glue completely.

After disconnecting 19 screws and then NFC and its wireless charging wires, The inside of the phone is fully exposed. Then, by opening the battery cables, you can disconnect and check the main board of the device. Also, as explained in the video, only cameras wide And Telephoto The device supports a stabilizer, and this feature includes a camera Super wide It is not possible.

In the next step Top speakers And Down The device is removed. YouTuber explains that the lower speaker assembly includes the components of the device’s vibrating motor that are housed inside. in order to achieve Touch engine The speaker assembly must also be disassembled.

After detaching the circuit board, Battery Due to the lack of a stretching tab, it can be removed using isopropyl alcohol, which causes the adhesive to loosen. In the following, you will see some auxiliary antennas that are only available on models with 5G network support.

Finally, we come to the part where we talk about the middle ground, which is a lot easier than previous generations. After exposing the heat around the display, the device’s panel can be removed from the frame using a plastic tool. Also, this time the connector is placed directly on the receiver connection, so a slight ticking sound should be heard when connecting.

Finally PBKreviews the ability to repair and disassemble parts of the Galaxy S22 Plus Score 7.5 out of 10 Gives.