Low repairability of Galaxy S22 and S22 Ultra in iFixit autopsy [تماشا کنید]

IFixit YouTube channel this time to Samsung’s new flagships namely Galaxy S22 And S22 Ultra Go to examine them. The video provided by this channel shows how to disassemble the parts of these devices, their problems and their repairability.

The first step in repairing the Galaxy S22 and S22 Ultra involves opening Back panel It becomes a device that even with accurate heating and detachment of the Galaxy S22 Ultra adhesive, you will probably see cracks and fractures in it.

At This video How to integrate S Pen On the Galaxy S22 Ultra as well New steam chamber The interior is designed to keep the phone cool while in use. But perhaps the most interesting discovery in this video has to do with the vibration motor inside the S22 devices, which iFixit explains is located on the bottom speaker instead of the top speaker.

The two parts that take up the most space on the Galaxy S22 Ultra are: S Pen storage location And Camera set It is. Apparently for this reason, Samsung has been forced to integrate its vibrating motor into the lower speaker assembly this time.

The following video explains that graphite tape, thermal paste, and a large steam chamber were used for the device, which Samsung Chips tries to compete with. Apple Silicone But it also causes the device to overheat. iFixit suggests that Samsung should design its phones a little thicker to keep the internal heat away from the chip, as well as provide space to use Battery traction tabs will be provided.

Galaxy S22 and S22 Ultra repair points

Finally iFixit gives the Galaxy S22 and its ultra version a repairable rating 3 out of 10 have given. The only advantage of the device for repairmen is the use of standard Philips screws, but replacing the battery without pulling tabs is still a problem. Also, the phones are made in such a way that repairing their screens is not an easy task.